Electro Acupuncture Unit with 4 Channels and AcuPoint Locator
The 2nd Generation 8088-II Electro Acupuncture Machine- Electro Stimulator features an indicator for sound and luminescent state, a timing switch, a power voltmeter, a music device playing when the treatment is over or before it starts and an operating output protection.
Features:
The output pulse waves of the machine are in low voltage, low frequency.
There are five types of pulse waves to be selected.
Dense-disperse wave: Dense-disperse wave displays alternatively disperse frequency is f1 same as base wave; dense frequency is about 100Hz; pulse duration is 0.5ms; FREQ2 regulates the frequency f2 of 10-40 cycles per minute.
Intermittent wave: Pulse shows at regular interval at a frequency of 10-40 cycles per minute.
Ripple wave: Its amplitude increases to maximum and drops suddenly, and repeats the process.
Respiration wave: Its amplitude increases first, then drops quickly to zero, and repeats this process.
The 808-II comes with 4 outputs, 8 wire clips that can be used on 8 acupoints at the same time.
